Tracklander Platform Roof Rack - Suits Nissan Y62 Patrol 2013+ TLRAL22FT The Standard Aluminium Full length Flat top Rack For Most 4WD’s with and without Gutters. All full gutter supports are designed to curve with the gutter shape, distributing the weight evenly over the vehicle gutters. It also is shaped to prevent sideways movement and therefore prevents damage to the roof of the vehicle. This is the perfect Roof rack for a low profile rack. New aerodynamic bolt on wind deflector. Fully Welded Mesh Base gives multiple tie down points Mounts using Gutter mount kits. 2200mm Long x 1250mm Wide x 40mm High. Fully adjustable leg mounts, curved to match the vehicle roofline and absorb flex and movement.
Raised air intake to prevent your engine from ingesting harmful elements
Increased airflow for your 02/2010 Onwards engines
Water separating air ram design to remove water from the air stream
Durable and UV stable snorkel and air ram for added strength
Comprehensive Nissan Patrol Y62 4WD Snorkel fitting guide with an accurate template for installation.
The SS62HF Nissan Patrol Y62 4x4 Snorkel is designed to deliver a huge volume of the coolest and cleanest air possible into the stock air cleaner assembly of 02/2010 Onwards engines.
With the huge air flow demands of each engine in the Nissan 02/2010 Onwards Patrol, Safari took the decision to design a snorkel system that raised the air intake to prevent ingesting harmful elements to the vehicles air cleaner.
Huge air flow is but one aspect of the ultimate in snorkel Nissan Patrol Y62 design. The Safari snorkel air ram is designed to perform two very important roles. The most obvious is to funnel cool clean air into the snorkel body - but just as importantly, the Safari air ram acts as a highly efficient water separator to remove rain water from the incoming air stream - thus ensuring safe engine operation through even the most torrential tropical storms.
The genuine Safari Nissan Patrol Y62 4x4 Snorkel body and air ram is manufactured to the highest standards in durable, UV stable, cross linked polyethylene material. In addition, the substantial material wall thickness delivers huge physical strength to ensure that the Nissan Patrol Y62 snorkel breezes through the toughest off-road conditions on the planet.
XFORCE - Exhaust - To suit NISSAN Patrol Y62 Series 1 to 4 - ES-NY62-03-VMK-CBS
4200KG GVM UPGRADE TO SUIT Y62 PATROL 2013 TO CURRENT
Suits all Australian models from 2013 to current. This upgrade is available for pre first registration (SSM Approved) or post first registration with a VSCCS engineers report. This kit is only available to suit HBMC equipped vehicles only, it DOES NOT suit coil and (traditional) shock absorber equipped Y62 Patrols.
This Y62 Patrol GVM Upgrade kit is configurable to suit your individual load requirements, we upgrade the factory springs (front and rear) to suit your needs.
The GVM upgrade kit includes,
Front coil springs, to suit;
No Bar | No winch
Bullbar | No winch
Bullbar | Winch
Rear coil springs, to suit;
150kg to 250kg of load
250kg to 350kg of load
450kg to 550kg of load
Rear offset camber/castor bushes
Front upper control arms
Heavy Duty lower control arms load rated to 2400kg
Installation of front and rear springs, heavy duty lower rear control arms, offset rear bushes, front upper control arms, refill and pressurise HBMC hydraulic systems, HBMC hydraulic fluid, freight and a front and rear wheel alignment.
THIS KIT IS NOT AVAILABLE FOR SHIPPING AND CAN ONLY BE INSTALLED AT OUR BROOKVALE LOCATION.
Lead time is minimum 4 weeks, please contact us to get accurate timelines and discuss your individual requirements.
Some vehicles will need rear airbags and custom solutions are available with in vehicle air compressors and remote (wireless) control systems are available.
Post first registrations upgrade require engineers reports which are available and additional costs will apply.
The price listed is the minimum investment option available and does not include airbags and engineers report (if required).
On Track 4x4 - Suspension Kit - Suits Nissan Y62 Patrol 50mm Lift - No Bar | No Winch | No rear load.
The S5 Patrol finally looks good. No offense to Nissan but the older Y62 models didn't quite have a tough look about them. But the Series 5 fixed that with a much improved front end. Well the Toro bar from Offroad Animal makes it look even better. You can give a serious face lift to your Patrol and give it that cool aggressive look that will make you smile every time you look at it. Not only does this bar look the part but it's super functional as well. A great platform for a winch and lights and does the job of protecting the front from Animal strikes and offroad mishaps.
This bar suits Series 5 Y62 TI patrols from MY19 on, TI-L mounts to be released soon
Full steel construction for ultimate protection, one piece construction.
Much improved approach angle over factory bumper and all competitors
Great platform for mounting a winch
Ability to mount winch without removing the whole bar (great for winch servicing)
Great platform for mounting lights or antennas
Works with all parking sensors and Adaptive cruise, and Autonomous Emergency braking features.
Looks awesome on the front of your Patrol
Much lighter bar compared to main competitors due to our much smarter design
Works with parking sensors, and Adaptive Cruise Radar
Works with factory head light washers
Welded one piece bar with welded wing supports for super toughness
Zinc plated then powder coated Matte black as standard
Hi lift jacking points integrated into design as standard
Suits most winches with no extras required including Warn Zeon winch
Factory fog lights relocate into the bar
Number plate flip included as standard for those running a winch
Can be colour coded to vehicle
Heavy duty steel recovery points included as part of the mounts
DASH OFFROAD - Predator Evo - Nissan Y62 Patrol 2019+ Series 5
This is bar is different to previous versions of the Predator bar and has been developed exclusively for the series 5 Y62 Patrol from the ground up. It will allow all factory sensors and headlight washers and has been built around the radar so no relocation is necessary.
All brackets and winch cradle has been made from steel whereas the 3 piece facia is made from aluminium to make it one of the lightest bars available for this vehicle.
Note product comes with both accessory bar PLUS integrated light bar surround. You will need to order the HUMMER light Bar also if you would like this option and also Fog Lights will need to be added too. See our Twin Fog Lights that is specific for the Predator Evolution Bar
Rear bush upgrade to allow us to correctly align the front and rear independent suspension systems.
Firestone H/D airbags with shrader valves to rear bumper for easy inflation.
Installation of all of the above.
Front and rear wheel alignment.
Wheels and tyres;
295/70R18 Maxxis AT811 Tyres x 5 of. These are an awesome tyre and a great natural upgrade to the Patrol. They're 5.2% larger in diameter than the standard tyre and legal under the national code of practice which states a maximum of 7% increase in tyre diameter.
ROH Invader 18x9 30P offset wheels x 5 of. They will increase the track by 10mm over standard, well within the maximum track width allowable increase of 50mm.
MORE 4x4 slimline flares.
Colour coding, multilayer and pearl paint included.
ROH Wheels - Invader - 18x9 30P Backspace - 6 on 5.5 - Matt Black
New to the exclusive range of ROH Dakar Proven Wheels®, the all new ROH Invader flow-forged 4×4 wheel comes in full matt black finish, available in 16”, 17” and 18” sizes.
Attack the outback or just cruise the urban streets with this all-new off-road Flow-forged wheel from ROH.
Flow-forging is the most advanced technology in use today by just a handful of specialist wheel manufacturers around the world. The process begins with unique cast pre-forms which are then flow-formed after casting to produce high-strength lightweight aluminium road wheels for both street and off-road applications.
Compared to conventional as-cast wheels, ROH Flow Forged wheels are comparable to more expensive forged aluminium wheels yet retaining the ultimate styling flexibility afforded by diecasting.
Invader will fit a large range of the most popular 4×4 and SUV vehicles including top-selling Hilux, Ranger, Colorado, BT-50, Triton and Navara. Invader is load-rated for LandCruiser 200 series in 17×9 at 1500kg per wheel and 18×9 at 1250kg per wheel and is an ideal choice when fitting a GVM+ suspension upgrade.
METHOD WHEELS - NV (305) - 18x9 18P/5.75" Backspace - 6 on 5.5 - Matte Black