Name: MAXTRAX MKII Titanium Grey
Brand: MAXTRAX
SKU: RG--15171
Price: 299.0 AUD
Availability: InStock

MAXTRAX MKII Titanium Grey

RG--15171

$299.00

Tax included. Shipping calculated at checkout.

MAXTRAX is the lightweight, easy-to-use vehicle recovery and extraction device that’s easily carried by almost anything with four-wheels ensuring an easy way out if your vehicle becomes stuck.
MAXTRAX takes the drama out of getting stuck. The aggressive large cleats on MAXTRAX sink their teeth into the tyre tread and the terrain under your 4WD vehicle to prevent it from slipping back into mud, snow, or sand and make vehicle recovery quick and easy.
MAXTRAX is the perfect fit for every outing. Measuring just 1150mm long X 330mm wide x 85mm tall (45 inches long X 13 inches wide), each set of MAXTRAX stacks together at a height of just 85mm (3.5 inches). MAXTRAX stows easily with the rest of your car camping, overlanding, or four-wheel drive touring gear.
Made of UV-stabilized, flexible, super tough engineering-grade reinforced nylon, MAXTRAX provides traction and a firm base to get your vehicle quickly back on track. They have been tested at the University of Queensland to wrap completely around a 33-inch tire without breaking.
Each MAXTRAX weighs just 3.4 kilograms (7.5 pounds). MAXTRAX is easy to carry and thanks to it’s signature double-edged design, it’s easy and quick to manoeuvre under your tires.
MAXTRAX have six comfortable built-in handles and a shovel at either end for removing excess earth to help get you unstuck quicker. They also have exclusive keyhole accessory points to allow you to securely mount your MAXTRAX.

Colour: Titanium Grey Please note: Actual colour may vary slightly from images shown. Warranty: We back our confidence in this quality Australian Made product with a lifetime warranty against faulty materials and workmanship. Shipping: Please provide a physical address as we CANNOT ship to Post Office Boxes. Australian orders: Shipping cost is automatically calculated when ordering. International orders: Shipping cost is manually calculated once your order is received. You will be advised by email the total cost of your order including shipping (International shipping is NOT free).

(MTX02TG)

SKU	MTX02TG
Barcode #	9 342256 000368
Brand	MAXTRAX
Shipping Weight	7.8000kg
Shipping Width	0.350m
Shipping Height	0.095m
Shipping Length	1.190m
Shipping Cubic	0.039567000m3
Unit Of Measure	ctn

MAXTRAX - Maxtrax Blaze Yellow

RG--17808

$299.00

Tax included. Shipping calculated at checkout.

MAXTRAX - Maxtrax Blaze Yellow - MTX02BY

The SAFE, SIMPLE, QUICK and EASY vehicle recovery device. The carton includes 2 MAXTRAX and 2 orange telltale leashes (so you can find your MAXTRAX when they’re buried).

MAXTRAX is the lightweight, easy-to-use vehicle recovery and extraction device that’s easily carried by almost anything with four-wheels ensuring an easy way out if your vehicle becomes stuck.
MAXTRAX takes the drama out of getting stuck. The aggressive large cleats on MAXTRAX sink their teeth into the tyre tread and the terrain under your 4WD vehicle to prevent it from slipping back into mud, snow, or sand and make vehicle recovery quick and easy.
MAXTRAX is the perfect fit for every outing. Measuring just 1150mm long X 330mm wide x 85mm tall (45 inches long X 13 inches wide), each set of MAXTRAX stacks together at a height of just 85mm (3.5 inches). MAXTRAX stows easily with the rest of your car camping, overlanding, or four-wheel drive touring gear.
Made of UV-stabilized, flexible, super tough engineering-grade reinforced nylon, MAXTRAX provides traction and a firm base to get your vehicle quickly back on track. They have been tested at the University of Queensland to wrap completely around a 33-inch tire without breaking.
Each MAXTRAX weighs just 3.4 kilograms (7.5 pounds). MAXTRAX is easy to carry and thanks to its signature double-edged design, it’s easy and quick to manoeuvre under your tires.
MAXTRAX have six comfortable built-in handles and a shovel at either end for removing excess earth to help get you unstuck quicker. They also have exclusive keyhole accessory points to allow you to securely mount your MAXTRAX.

Colour: Blaze Yellow Please note: Actual colour may vary slightly from images shown. Warranty: We back our confidence in this quality Australian Made product with a lifetime warranty against faulty materials and workmanship. Shipping: Please provide a physical address as we CANNOT ship to Post Office Boxes. Australian orders: Shipping cost is automatically calculated when ordering. International orders: Shipping cost is manually calculated once your order is received. You will be advised by email the total cost of your order including shipping (International shipping is NOT free).

MTXH50 - MAXTRAX - Hitch 50

RG--17649

$249.00

Tax included. Shipping calculated at checkout.

MTXH50 - MAXTRAX - Hitch 50

BONUS OFFER: BONUS MAXTRAX FUSE SHACKLE WITH EVERY HITCH 50 SOLD - VALUED AT $39

Designed exclusively for use with soft shackles; will not allow for fitment of steel shackles.

Precision CNC machined from 6061 billet Aluminium.

Anodised finish for corrosion protection.

Allows multidirectional pull in both vertical and horizontal axis

Weight: 1.45 kg

WLL: 8,800 kg / 19,400 lbs

Destructive Test Break Load: 44,000 kg / 97,003 lbs

Fits standard 50mm / 2-inch tow hitch receivers

Australian designed, engineered and tested

Backed by a comprehensive Quality Assurance Program, each hitch is individually x-rayed for inclusions.

MTXWR - MAXTRAX - Winch Ring

RG--17807

$199.00

Tax included. Shipping calculated at checkout.

MTXWR - MAXTRAX - Winch Ring 120

BONUS OFFER: BONUS MAXTRAX CORE SHACKLE WITH EVERY WINCH RING 120 SOLD - VALUED AT $49

Precision engineered from 6061 billet Aluminium.

Polished and brushed Aluminium finish.

Anodised finish for corrosion protection.

120mm Diameter.

Designed for use with soft shackles and synthetic winch ropes.

Weight: 620g

WLL: 12,500 kg / 27,557 lbs

Destructive Test Break Load: 62,508 kg / 137,806 lbs

Australian designed, engineered and tested

Backed by a comprehensive Quality Assurance Program, each ring is individually x-rayed for inclusions.

MTXSWR - MAXTRAX - Static Winch Rope 30m

RG--17811

$259.00

Tax included. Shipping calculated at checkout.

MTXKR10 - MAXTRAX - Kinetic Rope 10m

RG--17809

$209.00

Tax included. Shipping calculated at checkout.

MTXKR10 - MAXTRAX - Kinetic Rope 10m

The MAXTRAX KINETIC ROPES are designed, as their name suggests, to be the kinetic element during a vehicle recovery. The MAXTRAX KINETIC ROPES produce increased kinetic power compared to flat snatch straps, with up to 30% ELONGATION providing a smoother, safer recovery.

The MAXTRAX KINETIC ROPES have been designed and tested as part of the MAXTRAX RECOVERY SYSTEM. The MAXTRAX RECOVERY SYSTEM is comprised solely of MAXTRAX products and has not been tested with any third party branded products. Critically, if the MAXTRAX RECOVERY SYSTEM is overloaded the MAXTRAX FUSE SHACKLE is designed to be the weakest link, and the expected point of failure. Accordingly, YOU MUST USE a MAXTRAX FUSE SHACKLE in the MAXTRAX RECOVERY SYSTEM during any vehicle recovery. Only use rated recovery points when connecting the MAXTRAX FUSE SHACKLE or MAXTRAX CORE SHACKLE to a vehicle. Before using the MAXTRAX KINETIC ROPES for a vehicle recovery, ensure that any person involved reads and understands ALL THE INFORMATION ON THIS packaging, and on any warning labels attached to the MAXTRAX KINETIC ROPES.

1. Visually inspect the MAXTRAX KINETIC ROPES to ensure it is undamaged and in a safe and usable condition.

2. Attach the MAXTRAX KINETIC ROPES to the MAXTRAX HITCH, other MAXTRAX KINETIC ROPES, MAXTRAX STATIC ROPE or the vehicle’s rated recovery points using a MAXTRAX CORE SHACKLE or MAXTRAX FUSE SHACKLE.

3. MAXTRAX KINETIC ROPES can be used individually or connected using MAXTRAX CORE SHACKLES to make a rope the required length for your particular vehicle recovery scenario

4. Place the MAXTRAX RECOVERY DAMPENER over the MAXTRAX KINETIC ROPE or MAXTRAX WINCH ROPE and attach to loop or Shackle.

5. Using MAXTRAX 4WD RECOVERY TRACKS to provide a ramp will greatly reduce the forces and loads on all equipment during the recovery.

6. Clear the area of bystanders and spectators.

7. Commence the recovery by GENTLY taking up the slack in the system.

8. If the recovery is initially unsuccessful, try again with SLIGHTLY more momentum.

Materials:

Nylon 66 and Polyester

MAXTRAX Kinetic Rope 2m

Weight: 1.4 kg

Length: 24mm x 2m

MBS: 12000 kg/26455 lb

MAXTRAX Kinetic Rope 3m

Weight: 1.8 kg

Length: 24mm x 3m

MBS: 12000 kg/26455 lb

MAXTRAX Kinetic Rope 5m

Weight: 2.5 kg

Length: 24mm x 5m

MBS: 12000 kg/26455 lb

MAXTRAX Kinetic Rope 10m

Weight: 4.3 kg

Length: 24mm x 10m

MBS: 12000 kg/26455 lb

CARE & MAINTENANCE

The various components of the MAXTRAX RECOVERY SYSTEM are of high quality, but due to the very nature of their potential use, or misuse, they are susceptible to severe wear and tear, and to damage such as nicks, cuts, tears, fraying, burns and abrasion. Always carefully inspect MAXTRAX RECOVERY SYSTEM components before each use for wear and tear, cuts, nicks, abraded, burned, melted and frayed areas. DO NOT USE the product if it is damaged, cut, frayed, burned, melted, abraded or partially unwound OR does not have a clearly legible warning label fitted. To help prolong the life of your MAXTRAX RECOVERY SYSTEM components, they should be washed off, rinsed with clean fresh water and air dried at the earliest opportunity after use. To protect from external environmental weather factors, components should be stored inside the MAXTRAX RECOVERY KIT BAG. Replacement protective sheaths are available from our website.

SAFETY RECOMMENDATIONS

It is recommended that the minimum breaking strength of the strap should be between 2 and 3 times the gross vehicle mass (GVM) of any vehicle it is used with. It is advised that the strap must be suited to the gross vehicle mass (GVM) of the lighter of the 2 vehicles used in the recovery process.

SAFETY INSTRUCTIONS

Use only MAXTRAX Recovery products in the MAXTRAX RECOVERY SYSTEM. YOU MUST ALWAYS USE a MAXTRAX FUSE SHACKLE in the MAXTRAX RECOVERY SYSTEM for each vehicle recovery.

MTXRKB - MAXTRAX - Recovery bag

RG--17810

$189.00

Tax included. Shipping calculated at checkout.

MTXRKB - MAXTRAX - Recovery bag

The MAXTRAX Recovery Kit Bag is designed & engineered for sand, dirt and snow.

The heavy duty, triple-layer, weather resistant carry bag provides functional & stylish storage for all your MAXTRAX Recovery Gear. The large internal cavity is suitable for storing all your MAXTRAX Recovery Ropes. There are 5 external pockets to store and maximise access to components of the MAXTRAX Recovery System including the MAXTRAX Shackles and the MAXTRAX Winch Ring.

This bag comes complete with removable shoulder strap, handles and two external cylindrical pouches for the MAXTRAX Hitch or hydration storage. The MAXTRAX Recovery Kit Bag is all-purpose, with a low centre of gravity and rectangular footprint making it modular and stackable. There are many uses for the MAXTRAX Recovery Kit Bag including gym bag, overnight bag or food storage.

Materials: 600DPolyester with PVC Coating, Polyester Lining.

Dimensions of Bag when filled are approximately 600mm(L) x 400mm(W) x 240mm(H)

MAXTRAX Mounting Pin Set - MKII - MTXMPS

RG--1830

$50.00

Tax included. Shipping calculated at checkout.

Black Nylon and stainless steel quick-release pins for securely mounting your MAXTRAX on a roof rack or bars.

The set includes 4 pins which can securely hold 2 or 4 MAXTRAX, 4 stainless steel Nylock nuts and 4 flat stainless steel washers.

There's a hole in the top of each mounting pin for a padlock.

* Designed for MAXTRAX MKII only. (MAXTRAX NOT INCLUDED).
Weight: 100 grams each.
Size: 140mm long including 40mm of 10mm diameter thread. SS Nylock nuts & flat washers are included.
Warranty: Lifetime warranty against faulty materials and workmanship.

MAXTRAX Xtreme Mounting Pin Set - MKII - MTXXMPS

RG--17644

$50.00

Tax included. Shipping calculated at checkout.

Black Nylon and stainless steel quick-release pins for securely mounting your MAXTRAX on a roof rack or bars.

The set includes 4 pins which can securely hold 2 or 4 XTREME MAXTRAX, 4 stainless steel Nylock nuts and 4 flat stainless steel washers.

There's a hole in the top of each mounting pin for a padlock.

* Designed for MAXTRAX XTREME MKII only. (MAXTRAX NOT INCLUDED).
Weight: 100 grams each.
Size: 140mm long including 40mm of 10mm diameter thread. SS Nylock nuts & flat washers are included.
Warranty: Lifetime warranty against faulty materials and workmanship.

MAXTRAX - Roof rack mounting kit - MKII - MTXRRMK

RG--17943

$199.00

Tax included. Shipping calculated at checkout.

Roof rack mounting kit - MKII - MTXRRMK

The MAXTRAX Roof Rack Mount is designed to save space for your bulky camping gear or rooftop tent by mounting your MAXTRAX on the side of your roof rack. The Mount can securely carry 4 MAXTRAX MKII, 4 MAXTRAX XTREME, or a pair of each, plus a long-handled shovel.

The package includes the following components:

• 2 x Part A: powder-coated stainless-steel angle brackets featuring laser-cut MAXTRAX logos

• 2 x Part B: powder-coated stainless-steel braces featuring circular holes with orange silicone inserts and black knurled nuts featuring our Spike logo

• 6 x Part C: M8 stainless steel channel bolts, flat washers and Nyloc nuts

MAXTRAX - Fixing and Linking Kit

RG--1829

$39.99

Tax included. Shipping calculated at checkout.

For linking MAXTRAX together to make a continuous track or pegging MAXTRAX to a slippery surface to provide maximum traction. The kit includes 8 pegs & 4 straps made of the same super tough reinforced Nylon as MAXTRAX. * Designed for MAXTRAX MKII only. (MAXTRAX NOT INCLUDED) Weight: Straps are 35 grams each. Pegs are 35 grams each. Size: Straps are 270mm long. Pegs are 220mm long. Colour: Orange (Custom colours available: subject to minimum quantity order). Warranty: lifetime warranty against faulty materials and workmanship. Shipping: We CAN ship this product to Post Office Boxes. Australian orders: Shipping cost is automatically calculated when ordering. International orders: Shipping cost is manually calculated once your order is received. You will be advised by email the total cost of your order including shipping (International shipping is NOT free).

(MTXFLK)

SKU	MTXFLK
Barcode #	9 342256 000047
Brand	MAXTRAX
Shipping Weight	0.5000kg
Shipping Width	0.320m
Shipping Height	0.050m
Shipping Length	0.250m
Shipping Cubic	0.004000000m3
Unit Of Measure	ea

MTXRKB - MAXTRAX - Recovery bag

RG--18904

$139.00

Tax included. Shipping calculated at checkout.

MTXRKB - MAXTRAX - Recovery bag

The MAXTRAX Recovery Kit Bag is designed & engineered for sand, dirt and snow.

The heavy duty, triple-layer, weather resistant carry bag provides functional & stylish storage for all your MAXTRAX Recovery Gear. The large internal cavity is suitable for storing all your MAXTRAX Recovery Ropes. There are 5 external pockets to store and maximise access to components of the MAXTRAX Recovery System including the MAXTRAX Shackles and the MAXTRAX Winch Ring.

This bag comes complete with removable shoulder strap, handles and two external cylindrical pouches for the MAXTRAX Hitch or hydration storage. The MAXTRAX Recovery Kit Bag is all-purpose, with a low centre of gravity and rectangular footprint making it modular and stackable. There are many uses for the MAXTRAX Recovery Kit Bag including gym bag, overnight bag or food storage.

Materials: 600DPolyester with PVC Coating, Polyester Lining.

Dimensions of Bag when filled are approximately 600mm(L) x 400mm(W) x 240mm(H)