Raised air intake to prevent your engine from ingesting harmful elements
Increased airflow for your 02/2010 Onwards engines
Water separating air ram design to remove water from the air stream
Durable and UV stable snorkel and air ram for added strength
Comprehensive Nissan Patrol Y62 4WD Snorkel fitting guide with an accurate template for installation.
The SS62HF Nissan Patrol Y62 4x4 Snorkel is designed to deliver a huge volume of the coolest and cleanest air possible into the stock air cleaner assembly of 02/2010 Onwards engines.
With the huge air flow demands of each engine in the Nissan 02/2010 Onwards Patrol, Safari took the decision to design a snorkel system that raised the air intake to prevent ingesting harmful elements to the vehicles air cleaner.
Huge air flow is but one aspect of the ultimate in snorkel Nissan Patrol Y62 design. The Safari snorkel air ram is designed to perform two very important roles. The most obvious is to funnel cool clean air into the snorkel body - but just as importantly, the Safari air ram acts as a highly efficient water separator to remove rain water from the incoming air stream - thus ensuring safe engine operation through even the most torrential tropical storms.
The genuine Safari Nissan Patrol Y62 4x4 Snorkel body and air ram is manufactured to the highest standards in durable, UV stable, cross linked polyethylene material. In addition, the substantial material wall thickness delivers huge physical strength to ensure that the Nissan Patrol Y62 snorkel breezes through the toughest off-road conditions on the planet.
XFORCE - Exhaust - To suit NISSAN Patrol Y62 Series 1 to 4 - ES-NY62-03-VMK-CBS
TORQIT Exhaust to suit Nissan Patrol Y62 Series 1 to 5 - HS8179SS
TWIN 3″ INTO SINGLE 3″ CAT BACK FOR NISSAN Y62 5.6L SERIES 1 – SERIES 5 PATROL: 2013 TO CURRENT
3″ CAT-BACK SYSTEM STAINLESS STEEL
10 year warranty
304 grade stainless steel
Internal and external welding on all flanges for extra strength
Heavy duty wrap around brackets
3 bolt 10mm laser cut flanges
3” double braided stainless steel flew bellow
Amazing Exhaust note
PERFORMANCE GAIN: 7KW / 36NM
Perfect for towing and touring, Torqit’s Y62 Patrol 5.6L Series 1, 2, 3, 4 & 5 Stainless Performance Exhausts are specifically designed to create a deep note, increase power, and improve vehicle performance. Our Y62 Patrol exhaust is manufactured using 304 grade stainless steel, with a thickness of up to 2mm. One of the thickest and most durable mandrel bent systems in Australia, the 304 grade stainless steel produces a deep note, maximises power and torque, reduces exhaust gas temperatures (EGT’s), and guarantees extreme strength in even the toughest terrain.
This exhaust follows the same path of the factory system. It is a twin 3″ system that begins from the catalytic converters, then trails into a single exit 3.5″ tailpipe. The design contains two resonators and two mufflers. This design reduces the restriction on the flow of the exhaust system whilst still retaining a decent and acceptable sound.
Once the internal combustion takes place on an exhaust system, the engine expels exhaust gasses in the form of high pressure pulses. These high pressure pulses create very powerful sound waves. A muffler helps to reduces the sound to a tolerable level. The choice of mufflers in this system provides good performance and a nice tone without stealing too much back pressure.
Torqit also stocks Y62 Patrol high flow catalytic converters for purchasing separate to the system. If you are interested in purchasing these for your Y62 Patrol, please call us for a quote.
TICK STAINLESS STEEL An exhaust system is exposed to many varied elements, including extreme heat and rough terrain. To handle these harsh conditions, we use stainless steel that is up to 2mm thick to maintain structural strength even after bending. Being extremely durable and difficult to crack, you can go off-road with peace of mind that your Torqit Performance Exhaust system will stay intact. Steel thickness not only affects the strength of an exhaust system, but also the sound it will produce- the thinner the steel, the tinnier the note. As among the thickest mandrel bent systems available in Australia, Torqit Performance Exhausts produce a deep note without cabin drone.
304 GRADE STAINLESS STEEL
The highest quality steel used in exhaust systems is 304 grade stainless, which is renowned for its high strength, corrosion resistance, and easy maintenance. It is known as an austenitic stainless steel, meaning due to a high percentage of chromium and nickel it is extremely resistant to rust, stress, and harsh conditions such as high temperatures. The excellent properties of Torqit’s 304 grade stainless demonstrate its strength in comparison to the 409 grade stainless commonly used in the automotive industry. For heavy duty strength and resistance to corrosion, 304 grade stainless steel is the superior choice. A 4WD owner who undertakes water crossings, backs their vehicle into the water to unload a boat, or lives by the coast will especially benefit from our stainless steel systems.
INTERNAL AND EXTERNAL WELDS
High quality welds are essential to avoiding structural fatigue on joints, stopping cracks from forming, and preventing exhaust gas leaks. All Torqit Performance Exhausts are TIG welded internally and externally, to reinforce the system for maximum strength. TIG welding is complex and more time consuming than the usual MIG welding technique used on exhausts; however it is a key part of creating a premium system. Torqit’s welds are extremely precise, higher quality, and create a beautiful clean finish with no welding spatter.
MANDREL BENT SYSTEM
Torqit’s Mandrel Bender uses a flexible mandrel rod to support the pipe internally and prevent crinkling as it is bent. This maintains a smooth and constant diameter, improving the efficiency of your engine. With Torqit’s in house mandrel bender, we can maintain the structural integrity and thickness of our systems, prevent restricted exhaust flow, and reduce back pressure. State of the art programming means each exhaust is precisely replicated to follow the correct path, and guarantees accurate fitment.
This Y62 Performance Exhaust for a Nissan Patrol Series 1, 2, 3, 4 & 5 is a full bolt together system, and takes approximately 2 hours to install.
Brushed stainless steel tube up to 2mm thick
Premium 304 grade stainless steel
Fully mandrel bent system
Internal and external welds
Laser cut flanges
Heavy-duty wrap around brackets
Stainless steel resonator/muffler
Deep note without cabin drone
DIY bolt together install
Ten year product warranty
* Please note that any aftermarket accessories, including long-range fuel tanks and suspension upgrades, must be considered before ordering a Torqit exhaust. Please contact our head office to arrange a solution for your vehicle.
On Track 4x4 - Suspension Kit - Suits Nissan Y62 Patrol 50mm Lift - No Bar | No Winch | No rear load.
Tracklander Platform Roof Rack - Suits Nissan Y62 Patrol 2013+ TLRAL22FT The Standard Aluminium Full length Flat top Rack For Most 4WD’s with and without Gutters. All full gutter supports are designed to curve with the gutter shape, distributing the weight evenly over the vehicle gutters. It also is shaped to prevent sideways movement and therefore prevents damage to the roof of the vehicle. This is the perfect Roof rack for a low profile rack. New aerodynamic bolt on wind deflector. Fully Welded Mesh Base gives multiple tie down points Mounts using Gutter mount kits. 2200mm Long x 1250mm Wide x 40mm High. Fully adjustable leg mounts, curved to match the vehicle roofline and absorb flex and movement.
ROH Wheels - Invader - 18x9 30P Backspace - 6 on 5.5 - Matt Black
New to the exclusive range of ROH Dakar Proven Wheels®, the all new ROH Invader flow-forged 4×4 wheel comes in full matt black finish, available in 16”, 17” and 18” sizes.
Attack the outback or just cruise the urban streets with this all-new off-road Flow-forged wheel from ROH.
Flow-forging is the most advanced technology in use today by just a handful of specialist wheel manufacturers around the world. The process begins with unique cast pre-forms which are then flow-formed after casting to produce high-strength lightweight aluminium road wheels for both street and off-road applications.
Compared to conventional as-cast wheels, ROH Flow Forged wheels are comparable to more expensive forged aluminium wheels yet retaining the ultimate styling flexibility afforded by diecasting.
Invader will fit a large range of the most popular 4×4 and SUV vehicles including top-selling Hilux, Ranger, Colorado, BT-50, Triton and Navara. Invader is load-rated for LandCruiser 200 series in 17×9 at 1500kg per wheel and 18×9 at 1250kg per wheel and is an ideal choice when fitting a GVM+ suspension upgrade.
KAYMAR - Rear Bar - To suit NISSAN Patrol Y62 2017-19