SAFARI - ARMAX Snorkel - SS88HP - To suit 200 Series TOYOTA Landcruiser to 2015
SN-TOLA200-1912Regular price $638.00
Safari ARMAX Snorkel SS88HP suits Toyota Landcruiser 200 Series to 2015
SS88HPR (Replaces Factory Toyota Snorkel)
Safari Armax 200 Series Toyota Land Cruiser 4x4 Snorkel Features
Up to 50% increased airflow for your 200 Series Land Cruiser engine
Safari’s rounded style Air Ram; however with minimum 4” neck and an optimised air flow, low restriction grill
Australian designed, moulded and manufactured
Design and flow tested by our in house engineers for maximum performance
Development in conjunction with other soon to be released ARMAX™ performance enhancement products.
Raised air intake to prevent your engine from ingesting harmful elements
Water separating air ram design to remove water from the air stream
Durable and UV stable snorkel and air ram for added strength
Comprehensive Toyota Land Cruiser 4WD Snorkel fitting guide with an accurate template for installation.
The SS89HP Toyota 200 Series Land Cruiser 4x4 Snorkel is designed to deliver up to 50% more air than the OE air intake for Toyota Land Cruiser engines.
With the popularity of performance upgrades using engine management and larger exhausts, Safari 4x4 Engineering took the decision to design a snorkel system that not only raised the air intake to prevent ingesting harmful elements to the vehicles air cleaner, but also would be able to deliver the necessary volume of air into the engine, therefore maximising the performance enhancements potential.
Huge air flow is but one aspect of the ultimate in snorkel Toyota Land Cruiser design. The Safari ARMAX snorkel air ram is designed to perform two very important roles. The most obvious is to funnel cool clean air into the snorkel body - but just as importantly, the Safari ARMAX air ram acts as a highly efficient water separator to remove rain water from the incoming air stream - thus ensuring safe engine operation through even the most torrential tropical storms.
PIRANHA - Dual Battery tray - To suit Toyota Landcruiser 200 Series Petrol V8
DBAT-TOLA200-16549Regular price $195.00
Weight (kg) 1.85Kg
‘Piranha Off Road products are not associated in any way with Toyota Australia or any of its related companies’
Suitable for Self Fit
Approximate fitting time 1 hour
Tray is Suitable for 200 series V8 Petrol and Suitable for Lexus LX570.
Special Top Mount
265mm Long Cycle Duty
iDrive - EVC171 - Suits various models
PU--1523Regular price $299.00
DRIVETECH 4X4 - Filter Kit To Suit 200 series Landcruiser.
FK-TOLA-8447Regular price $87.89
WHITELINE - UCA - To suit TOYOTA Landcruiser/LEXUS - KTA246
SU-TOLA-15406Regular price $829.60
Whiteline UCA Upper Control Arms - suits Toyota Landcruiser 200 Series and Lexus LX470/570 KTA246
LEXUS LX570 URJ201(11/2007-ON)
TOYOTA LANDCRUISER GRJ200, UZJ200, VDJ200, URJ202 IFS(11/2007-ON)
A short fall of the modern day IFS 4wd is the adjustment range provided for successful wheel alignments, this becomes even more of an issue when the vehicle is lifted by more than 1 inch. Not only does the vehicle run into camber and caster issues, but ball joint articulation and clearance issues to the coil over strut at ride and droop height. The new Whiteline offset UCA (Upper Control Arm) is an all-in-one solution for any vehicle that has been lifted between 30mm and 70mm. Providing an increase between +2.5 and +3.5 degrees of caster and up to 1.5 degrees of negative camber increase (figures quoted are based off an approximate 50mm/ 2 inch) along with greater clearance to the coil over strut and more articulation of the arm by virtue of new maintenance free GIIRO bushing technology.
Engineered to alter/ optimise camber alignment to compensate for body roll, body distortion and tyre roll when cornering.
Engineered to alter/ optimise caster alignment to maximize tyre contact patch during roll, improve turn-in response & increase directional stability.
Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Whiteline's latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
PTFE lining provides an extraordinary low coefficient of friction eliminating the need to lubricate the bushing.
Warranty: 3 Year / 60,000Kms