#MORE4X4Tuned - Power upgrade to suit Toyota Landcruiser 79 Series S/C & D/C 2017+ DPF Back
A kit specifically designed to improve driveability for towing and touring by increasing power and torque using our #MORETune ECU Remapping service, a high flow Legendex exhaust system and IDrive throttle controller.
IDrive throttle controllers reduce throttle lag/delay and is tunable to suit your current driving demands whether it's freeway, offroading or towing. Couple that with a high flow exhaust system and MORETune Remap and the end result is nothing else than a massive improvement in power, torque and driveability.
OFFROAD ANIMAL - Rock Sliders to suit Toyota Landcruiser 78/79 Series 2007 on
Okay these rock sliders kick arse. I mean seriously look at them. No other comes close. Designed with serious protection in mind as well as stunning good looks, you'll be the envy of all with these bad boys installed. Don't let your vulnerable sills cop a hiding. Ditch those factory piss-weak steps off and install these bad boys for piece of mind protection and great access as a step.
A very innovative design has made these super tough sliders easier to fit than most others. First install the 3 heavy duty steel brackets on chassis, then install our awesome backbone and tread step. The backbone is made from ultra tough 6061 T6 Aluminium extrusion that is designed to be much stronger than any steel section other are using. Being similar in weight and much stronger, it also allows for easy fitment of the steel tread plate step.
These come standard in Matte Black. The slider step with scrub rails is different to the step with no scrub rails. The mounting brackets and extrusion however are the same
Seriously protects side of your Land Cruiser
Handy step for getting in and out of your wagon or accessing roof rack
Looks way better than any other slider out there
Did I mention these bad boys look fully sick bro
Angled up by 30 degrees for awesome off-road clearance.
Heavy duty steel brackets mount individually direct to chassis and to backbone
Crazy strong backbone, made from Aluminium 6061 T6 Extrusion
Tough steel step with extruded tread for nice look and feel, and actually works heaps better than diamond plate for grip
The Toyota 70 series Landcruiser is known for how bad the stopping power is from factory and this is due to the small single diaphragm booster.
JMACX has now fixed the issue by creating a brand new direct bolt in replacement brake booster. This is a double diaphragm booster that is specifically made for the 70 series Landcruiser that will increase your vehicles stopping power by up to 30%. The JMACX double diaphragm brake booster comes with engineering compliance paperwork & approval number based on Federal ADR35 Full compliant brake test that is available to be sent directly to certified engineers for sign off or Transport Authority.
ABS Models are on all 70 Series Landcruisers model year (MY) 2012 to current
NON ABS Models are from 2000 to 2012
The JMACX double diapgragm is a direct bolt in brand new replacement
The JMACX double diapgragm boasts increasing braking performance by up to 30%
DWIZ - Rear upgraded diff to suit 70 series Landcruiser (All Models)
JMACX Heavy Duty Rear Axle - Suits Toyota 70 Series (ALL MODELS)
JMACX UPGRADED LEAF SPRING DIFF HOUSING KIT & AXLE PACKAGE
Our heavy duty diff upgrade that suits all 70 Series VDJ V8 Landcruisers with leaf rear suspension. The JMACX upgraded diff housing also has a engineered certified axle load rating of 2700kg with built in safety margin of 300kgs and this is the most important part don’t be fooled by huge tonne rating numbers on other diff housings if it doesn’t have a stated axle rating then don’t trust it. (if you need help calculating your weight, we can help by weighing your vehicle on our scales).
JMACX heavy duty housing is a fully fabricated 6mm thick housing with increased axle tube trusses and heavy duty brackets with chromoly spindles which are far stronger than the OE items.
Our heavy duty diffs correct the rear track to match front as factory units are 100mm narrower. Our diff is factory electric locker compatible.
Our heavy duty chromoly 2 piece axles with drive plates are stronger than factory axles.
Stronger diff housing
Fully floating axles
Better on & offroad handling
Direct bolt in (No modifications needed)
Corrects rear axles track
Comes with extended brake line & handbrake extensions
Standard powdercoated BLACK
Is the Diff available for my standard leaf spring v8 Landcruiser?
Yes JMACX manufactures a leaf diff and axle upgrade kit that addresses increased axle load rating, track correction and stronger axles.
Can I install it myself?
Yes and certification documents for this can be supplied by JMACX directly to your certifying engineer or department of transport.
What about Engineering?
All installations will require engineer inspection & certification for each vehicle. JMACX will supply LB2 documentation for the diff upgrade directly to your certifying engineering or department of transport.
How much will an Inspection and Mod Plate Cost?
Between $1300 and $1500 (roughly, depending on total certification requirments and other modifications to the vehicle like long range fuel tanks etc).
Does the kit contain parts that are custom and maybe difficult to find if I'm in the middle of nowhere?
No, our heavy duty diff housing maintains all factory brakes, seals hubs & factory Toyota diff centre.
What if I break an axle?
Our heavy duty diff housings are full fabricated units that exceed the strength of the factory original unit. JMACX axles are the strongest production manufactured axle for Toyota Landcruiser available
How long does it take to Install?
The leaf diff installation usually can be completed in 5-6hrs vehicle dependant
Can I have a custom colour?
Yes our diffs come powder-coated black standard but you can choose a different colour from the Dulux powder-coat colour chart .
Does the new wide track diff correct the rear axle track?
Yes, our diff is 100mm wider than the factory Toyota assembly.
Will it affect my insurance?
No, usually as long as it is engineered certified. but it is up to each individual to check with their insurer. (Generally insurers only require the vehicle to be legal.)
SAFARI - ARMAX Snorkel - To suit 70 Series TOYOTA Landcruiser
Safari ARMAX Snorkel - Suits 70 Series Landcruiser from 2007 to present
The SS79HPD Toyota 70 Series Land Cruiser 4x4 Snorkel is designed to deliver up to 50% more air than the OE air intake for Toyota Land Cruiser engines.
With the popularity of performance upgrades using engine management and larger exhausts, Safari 4x4 Engineering took the decision to design a snorkel system that not only raised the air intake to prevent ingesting harmful elements to the vehicles air cleaner, but also would be able to deliver the necessary volume of air into the engine, therefore maximising the performance enhancements potential.
Huge air flow is but one aspect of the ultimate in snorkel Toyota Land Cruiser design. The Safari ARMAX snorkel air ram is designed to perform two very important roles. The most obvious is to funnel cool clean air into the snorkel body - but just as importantly, the Safari ARMAX air ram acts as a highly efficient water separator to remove rain water from the incoming air stream - thus ensuring safe engine operation through even the most torrential tropical storms.
Part Number: SS79HPD
Up to 50% increased airflow for your 70 Series Land Cruiser engine
Safari’s rounded style Air Ram; however with minimum 4” neck and an optimised air flow, low restriction grill
Australian designed, moulded and manufactured
Design and flow tested by our in house engineers for maximum performance
Development in conjunction with other soon to be released ARMAX™ performance enhancement products.
Raised air intake to prevent your engine from ingesting harmful elements
Water separating air ram design to remove water from the air stream
Durable and UV stable snorkel and air ram for added strength
Comprehensive Toyota Land Cruiser 4WD Snorkel fitting guide with an accurate template for installation.
STEDI - Switch Fascia - to suit 70 series Landcruiser - LC70-PANEL-RHD-RH
If you drive a Toyota Landcruiser 70 series Landcruiser, our all-new LC70 switch fascia suits all models 76, 78, 79.
Our focus was absolute Original Equipment levels of fit and finish. Don't confuse our switch fascia with other 3D printed items on the market, our fascia are truly injection moulded with our own tooling and know-how to an very high specification & material composition.
The switch panel accepts our square Toyota switches in any combination of 8 switches in the lower panel section. The upper switches blank remain the Factory tall type Toyota switches so you can transfer the factory Toyota switches to the upper fascia section. Installation takes approximately 5 minutes (not including wiring) and creates spaces to hold enough switches for even the most complicated builds.
The lower panel section holds our square type switches, which are available in numerous configurations (with UHF, USB and voltmeter variants coming soon) and with blank panels available for purchase separately.
Landcruiser VDJ 76/78/79 Series Front Mount Intercooler Kits - Standard Twin Entry Version
We are convinced our PDI Landcruiser VDJ79 Front mount intercooler is the best choice for those looking to make more power or want to help the engine maintain its power delivery when run under constant high load. Our Mk3 intercooler kit is fitted to a VDJ76 pumping out over 500rwhp.
Works with any bull-bar and winch installation no cutting like other models.
Has all of the core above the bumper and bull-bar for exposure to cool air.
Will not cause any overheating.
On standard injectors, a late model dual cab has made 220rwkw with the assistance of our PDI front mount. In a single quick run you can do that with other intercoolers but our kits have shown they can repeat this many times due to the superior heat dissipation.
If all you want is better towing performance or reduced EGT for highway driving we have a very satisfied customer reporting a drop from 330degC to 280degC when compared to the leading aftermarket top mounted intercooler. Your engine will be more spirited due to the cooler intake temperatures.
The PDI Landcruiser VDJ79 Front mount intercooler provides the best intercooling for both high load and low speed work. The core sits close to the condenser which results in air being pulled through by the engines main cooling fan while working hard but while
Tests we've done have shown the drop in post intercooler intake air temperature was 3x greater with the PDI intercooler than the best of the aftermarket top mount options currently available. The intake air temperatures were cooler at all speeds.
NOTE: Due to change in chassis on the latest revision of the single cab VDJ79 to get ANCAP rating we can only supply this kit in single entry design.
The single and dual entry kits use the same intercooler and same hot side piping to the turbo – only the cold side piping is different. The factory setup has two throttle bodies facing left and right which go into the factory top mounted intercooler.
The dual entry option connect into both of these, but splits the outlet from the intercooler. The single entry removes the butterflies and the section they bolt to, which also has the feed from the EGR (exhaust gas recirculation emissions system) so the EGR input becomes blocked off with a plate. For all 200 series and post 2013 VDJ79/76/78 the two throttle bodies must be plugged back in to prevent the engine throwing codes and de-rating the power.
For early 70 series they can be left off the engine with an ECU reflash to clear the fault from them not being connected. We supply a bracket to mount the throttle bodies and hang either side of the single entry intake adapter.
Reason to go with the single entry kit
Chasing max responsiveness and have high flow turbos. The factory throttles are only fully open when your foot is flat to the floor. The rest of the time they are moving to assist with EGR flow.
Looking to have the neatest intercooler piping, with less connections.
Reason to go dual entry:
Want to keep the EGR system connected to intake to meet emissions requirements.
Want to keep the butterflies (throttle valves) in the system to give smooth shut down, maintain factory setup and for those with auto transmission, maintain the ability to shut down the engine in case it ever starts to run on its own fumes (this is a low probability, but high risk outcome).
This 2166mm/85.3" long, 3/4 size, Slimline II cargo carrying roof rack kit for the 78 series Toyota Land Cruiser contains Slimline II Tray and Wind Deflector, as well as 8 Gutter Mount Legs for mounting the Tray to the vehicle. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack. Installs easily with no drilling required.