Easy to install, simply connect the black connector to the negative battery terminal and the red connector to the positive terminal. After installing the BM2 app, switch on your bluetooth and open the app. Your Baintech Bluetooth monitor will automatically connect with your phone and display real time information on your connected battery.
Perform cranking tests on your battery condition and idle condition testing via the app
Maximizing Battery Performance
Wireless battery monitoring via mobile device
Bluetooth connectivity - free app for iOS & Android (Battery Monitor BM2)
Receive notification and warnings of your battery condition via the app
Short-circuit and reverse connection protection
Data stored for up to 31 days if out of sync
Review historical data
Compatible with all 12-volt vehicle batteries
PIRANHA - Dual battery Tray - To suit 70 Series Landcruiser
STEDI - Switch Fascia - to suit 70 series Landcruiser
If you drive a Toyota Landcruiser 70 series Landcruiser, our all-new LC70 switch fascia suits all models 76, 78, 79.
Our focus was absolute Original Equipment levels of fit and finish. Don't confuse our switch fascia with other 3D printed items on the market, our fascia are truly injection moulded with our own tooling and know-how to an very high specification & material composition.
The switch panel accepts our square Toyota switches in any combination of 8 switches in the lower panel section. The upper switches blank remain the Factory tall type Toyota switches so you can transfer the factory Toyota switches to the upper fascia section. Installation takes approximately 5 minutes (not including wiring) and creates spaces to hold enough switches for even the most complicated builds.
The lower panel section holds our square type switches, which are available in numerous configurations (with UHF, USB and voltmeter variants coming soon) and with blank panels available for purchase separately.
The DCC Pro In-Vehicle DC-DC Battery Charger was developed for the purpose of charging and maintaining any auxiliary battery in an installation where the starting battery is used as the supply source. It has been designed for use in 4WDs, RVs, buses, coaches, caravans, campers or any vehicle with a 12VDC electrical system.
The DCC Pro is built for our tough Australian conditions. Unlike many imported products, particularly those produced for the European market, it is designed to maintain output in the harshest of environments under the highest ambient temperatures.
The DCC Pro is a standalone power conversion device. It will manage a variety of different battery types according to their specific charging requirements. As no modification to the vehicle’s original wiring is required this ensures the manufacturer’s electrical system is not compromised in any way.
The DCC Pro is a highly innovative product with many unique features. It has the flexibility to adapt to almost any vehicle, old or new, simple or complex with or without an ECU controlled electrical system and even allows the operator monitor the charging status from the comfort of the cabin!
The best in-class performance for a charger of this size
The DCC Pro is a true 25 Amp charger, that is, 25 Amps at 50°C all day, every day. In addition the DCC Pro will continue charging at reduced output right up to 85°C!
Remote monitoring from the comfort of the driving seat
The DCC Pro is kitted with an interactive, in-cabin display for remote monitoring of the auxiliary charging status from both main and solar power charging sources.
Solar ready – no need for a separate regulator or relay
The DCC Pro is a complete MPPT solar charge controller capable of handling 250 Watts of power with up to 30% greater efficiency than a standard PWM regulator.
Under bonnet charging device is dust and water proof
The DCC Pro is sealed to IP67 standard and is designed to be mounted in the engine bay or on the chassis itself. The DCC Pro can handle temporary submersion!
Capable of monitoring two chargers on a single display
The DCC Pro Remote Display can accept and monitor two Individual Charging Devices at once! No need to purchase a second display when two auxiliary batteries are used.
Input Voltage –
Main: 9 – 17 VDC,
Solar Input: 27 VOC max. (open circuit – no load)
Solar Power – 250 Watts nominal (300 Watts peak)
Continuous Rating – 25 Amps @ 50°C
Current Draw –
Charging Device: Including LED indicator <10mA
Remote Display: With backlight off: 10mA max,
With backlight on: 30mA max
Boost Voltage –
Standard Lead Acid: 14.4 VDC Nominal
Absorbed Glass Mat: 14.6 VDC Nominal
Gelified Electrolyte: 14.2 VDC Nominal
Lead Calcium: 14.8 VDC Nominal
Float Voltage – 13.2 VDC Nominal
Electrical Protection –
Thermal overload shutdown – auto reset
Electrical overload shutdown – auto reset
Under voltage disconnect – auto re-connect
Over voltage disconnect – auto re-connect
Reverse polarity protection of main terminals
Environmental Protection –
Charging Device: IP67 (internal components only)
Remote Display: IP40 (not dust or water resistant)
Operating Temperature – -20°C to +85°C
Operating Humidity – Up to 98%
Charging Device Materials –
Heatsink: E-Coated ADC-3 die cast aluminium
Blue Plastics: Temperature resistant PC/ABS alloy
Black Plastics: 15% glass reinforced PBT
Transparent Plastics: Temperature resistant PMMA
Remote Display Materials –
Dark Grey Plastics: Temperature resistant PC/ABS alloy
Transparent Plastics: Temperature resistant PMMA
Terminal Material – Tin plated brass
Terminal Fasteners – 304 stainless steel
Conformity – AS/NZS CISPR 11:2004 for EMC
Charging Device: 112 x 112 x 75mm (including terminal cover)
Remote Display: 60 x 36 x 59mm (including mounting bracket)
Engines: All engine and transmission configurations
Off Road Downunder Pty Ltd is the first company to introduce a battery tray under the rear seat of the latest PX PX2 Rangers and Mazda BT50’s. We have designed the tray to install an AGM type battery (Optima Yellow top D34) in the cabin area, due to the limitations of space in the engine compartment. The Optima AGM battery is fully sealed and safe for in cabin usage.
Precision laser-cut battery tray with “OFFROADDOWNUNDER LOGO” cut out in base tray.
Matching cut outs in side bracket to correspond with vehicle body, to allow easy cabling access
Australian made using 2mm Australian mild steel
Designed & Manufactured and Owned by Off Road Downunder Pty Ltd since November 2011.
Battery tray base and side mounting bracket
2 x Rubber battery terminal covers (positive & negative)
Heavy duty Cam-buckle strap (Australian Made)
Installation bolt kit, now with button head bolts.
Recommended auxiliary battery / size:
Optima yellow top D34 (AGM) ONLY
Under drivers side rear seat in compartment
Utilises factory mounting holes + (2) extra 5mm diameter holes
PIRANHA - Battery Tray - To Suit TOYOTA Hilux 167 Series 1997 to 2005 1KZ-TE - 3.0Ltr Turbo Diesel
The DVR602 is a dual DVR system that captures your journey in crisp high definition, providing you with ultra clear front and rear image recording. With built-in WiFi, you can connect your smartphone or tablet to the DVR602 allowing you to view and transfer your recorded files easily. GPS logging enables you to record and map out your journey and the G-Sensor feature will ensure that your footage is saved and not recorded over, in the event of sudden impact on your vehicle due to an incident.
GENERAL – Display: No – via WiFi – Chipset: Mstar 8328Q – Image Sensor: Front: OV2718, Rear: H65 – Image Sensor Resolution: 4 Mega Pixels – Resolutions: Front: 1920 x 1080p @ 30fps, Rear: 1280 x 720p @ 30fps – Lens: 6G Element Glass, F/2.6 – Lens Viewing Angle: 150° Diagonal – Memory Support: 1 x 64GB Micro SD Card* (Not Included) – WiFi: Yes (APP – MK Smart) – GPS Function: Yes – Night Vision: Low Lux, WDR (Wide Dynamic Range) – Mapping Data: Route, Speed, – G-Sensor: Yes – Parking Monitoring: Yes (Requires contstant power) – Seamless Loop Recording: Yes – Photo Function: Smart Gesture for Instant Photos – Codec: H.264 – File Type: .MP4 – Power Supply: 12/24V Dual USB Cig Power Adaptor – Built-In Battery: No – Settings Memory: Built-In Super Capacitor – Dimensions: Front: 117W x 36H x 58Dmm (Without Mount), Rear: 60W x 29H x 22Dmm (Without Mount) – Mounting: 2 Sided Adhesive (Included)
INCLUDED – 4m Power/GPS Cable – Adhesive Pads – Dual USB Cig Power Adapter – 6.3m Rear Cam Extension Lead – Includes 64GB High Endurance MLC SD Card
* For continuous recording Axis recommends: SDHC-32MLC or SDXC-64MLC SD cards.
The DVR601 is a compact, FULL HD 1080p DVR system that captures your journey in crisp high definition, providing you with ultra clear image recording. With built-in WiFi, you can connect your smartphone or tablet to the DVR601 allowing you to view and transfer your recorded files easily. GPS logging enables you to record and map out your journey and the G-Sensor feature ensures that your footage is saved and not recorded over, in the event of sudden impact on your vehicle due to an incident.
GENERAL – Display: No – via WiFi – Chipset: Mstar 8328Q – Image Sensor: OV2718 – Image Sensor Resolution: 4 Mega Pixels – Resolutions: 1920 x 1080p @ 30fps – Lens: 6G Element Glass, F/2.6 – Lens Viewing Angle: 150° Diagonal – Memory Support: 1 x 64GB Micro SD Card* (Not Included) – WiFi: Yes (APP – MK Smart) – GPS Function: Yes – Night Vision: Low Lux, WDR (Wide Dynamic Range) – Mapping Data: Route, Speed – G-Sensor: Yes – Parking Monitoring: Yes (Requires constant power) – Seamless Loop Recording: Yes – Photo Function: Smart Gesture for Instant Photos – Codec: H.264 – File Type: .MP4 – Power Supply: 12/24V Dual USB Cig Power Adaptor – Built-In Battery: No – Settings Memory: Built-In Super Capacitor – Dimensions: 117W x 36H x 58Dmm (Without Mount) – Mounting: 2 Sided Adhesive (Included) – Optional: Rear HD Camera
INCLUDED – 4m Power/GPS Cable – Adhesive Pads – Dual USB Cig Power Adapter – Sandisk 32GB High Endurance MLC SD Card
OPTIONAL – Rear HD Camera
* For continuous recording Axis recommends: SDHC-32MLC or SDXC-64MLC SD cards
PIRANHA - Battery Tray - To suit TOYOTA Prado 150 2.8CRDi